WOVEN WIRE MESH
Woven brass mesh for defined screening and warm-metal detailing. Select the alloy composition, wire diameter and opening together, with appearance or process compatibility guiding the final choice.
PRODUCT OVERVIEW
Brass woven wire mesh combines a warm golden appearance with accurately repeated openings formed by interlaced copper-zinc alloy wires. The brass composition, mesh count, wire diameter, clear aperture and plain or twill weave should be defined as a complete specification. Finished roll or panel dimensions, visible edges and the required support frame also influence the appearance and handling of the installed mesh.
Typical applications include decorative inserts, cabinet and ventilation screens, general sieving and selected filtration duties where the alloy is compatible with the process. Brass is not automatically interchangeable with pure copper or stainless steel, and different copper-zinc compositions can respond differently to forming and exposure. Common specifications are regularly stocked, while non-standard alloys, openings, widths and cut panels can be produced to order.
MATERIAL SELECTION
The woven texture and warm tone offer a distinct alternative to silver-colored screens. Controlled openings allow a screening requirement to be expressed as a specific wire-and-aperture combination.
Brass is not a universal replacement for stainless steel or pure copper. Review the medium, electrical requirements and alloy susceptibility before specifying demanding service.
Decorative inserts and general sieving or screening where alloy compatibility is established. Conductive applications require the actual electrical and assembly criteria to be defined.
TECHNICAL INFORMATION
Final dimensions and compatible combinations are confirmed against the approved drawing or mesh specification before production.
Reference copper-zinc compositions: 65/35 and 80/20. Confirm the required designation and composition on the order.
Reference mesh range: 6–200 mesh. This does not mean every wire size and width is available at every mesh count.
Specify both wire diameter and clear opening, plus any tolerance or screening acceptance requirement.
Confirm plain or twill construction, roll or panel dimensions and edge detail.
Agree cleanliness, natural appearance and any finish-related requirements before packing.
Common specifications are regularly stocked, while non-standard sizes, materials and finishes can be produced to order. Final quantities and delivery schedules are confirmed with the quotation.
FROM WIRE TO FINISHED WOVEN MESH
Agree composition and compatibility with the task.
Match mesh count, wire and weave.
Define roll sizes, cuts and edge support.
Review openings and surface against the order requirements.
RELATED PRODUCTS
View material-specific specifications and selection guidance for this product.
FREQUENTLY ASKED QUESTIONS
Material, specification and commercial details are confirmed for the actual project.
Brass is a copper-zinc alloy, so its properties and appearance differ from pure copper. Specify the task before choosing between them.
No. Wire diameter is also required; the same mesh count can have different clear openings.
Only after the process medium, temperature, mechanical duty and required cleanliness have been reviewed.
It can be considered when mesh appearance, support, edge retention and acceptable color change are agreed.
No. Composition and environment affect suitability, so the alloy must be selected for the actual conditions.
LET’S WORK TOGETHER
Send the alloy preference, opening requirement and finished dimensions. Not sure of the specification? Send a photo, sketch or application description, and we can help identify the details needed for a quotation. Send photos or drawings by email to trade@hightopmetalmesh.com.
